SaunaLife SaunaGear 302 Waterproof Sauna Electrical Enclosure

Large Sauna Electrical Enclosure

Designed for larger outdoor sauna electrical components that require more room than a small controller enclosure.

IP67-Rated Weather Protection

The SaunaGear 302 is IP67 rated to help protect against dust and water intrusion when installed correctly.

UV-Stabilized Polycarbonate Construction

The enclosure body is made from UV-stabilized polycarbonate to support durability in outdoor environments.

Stainless Steel Latches

Stainless steel latches help keep the enclosure securely closed and provide corrosion-resistant detail for exterior use.

Continuous Gasket Seal

A continuous gasket helps maintain a protective seal around the enclosure door when properly closed.

Hinged Access Door

The hinged access door allows service access while helping keep equipment protected when closed.

Internal Mounting Panel Included

The included internal mounting panel creates a clean surface for mounting compatible equipment inside the enclosure.

Mounting Feet Included

Enclosure mounting feet are included for secure installation on an approved surface.

Important Exterior Electrical Requirement

If Electrical Equipment Is Mounted Outside on an Exposed Sauna, Use a Waterproof Enclosure

If your sauna’s electrical equipment will be installed on the exterior of an outdoor sauna and exposed to rain, snow, humidity, moisture, or direct weather, it should be installed inside a properly sized waterproof electrical enclosure.

This is especially important for:

• Outdoor saunas without a covered porch or overhang
  
• Electrical equipment mounted on an exposed side wall
  
• Rainy, snowy, coastal, or humid climates
  
• Outdoor sauna kits with exterior-mounted controls or power components
  
• Installations where equipment cannot be placed in a dry, protected indoor location
  

A waterproof enclosure helps protect sensitive components and supports a cleaner, more reliable installation. It does not replace licensed electrician installation, manufacturer requirements, or local electrical code.

SaunaGear 302 vs. SaunaGear 300

Choose the Correct Enclosure for the Equipment You Are Protecting

The SaunaGear 302 is the larger enclosure option and is intended for compatible sauna electrical equipment that requires more interior space.

The SaunaGear 300 is the smaller enclosure option and is typically used for small digital sauna control panels or touchscreens.

A simple way to think about it:

• SaunaGear 300: Small digital controller / touchscreen enclosure with a clear door to see the control panel.
  
• SaunaGear 302: Larger sauna electrical equipment enclosure
  

Always confirm the dimensions of the equipment being installed, wiring requirements, ventilation needs, and code requirements with your licensed electrician before ordering.

Compatibility

Designed For

• Compatible outdoor sauna electrical equipment
  
• Larger sauna electrical components requiring weather protection
  
• Exterior sauna equipment placement
  
• Outdoor sauna kits
  
• Backyard sauna installations
  
• Cabin sauna installations
  
• SaunaLife outdoor sauna installations
  
• Exposed or moisture-prone sauna equipment locations
  

Not Designed For

• Use as a breaker panel
  
• Use as a substitute for a licensed electrical installation
  
• Equipment that exceeds the internal dimensions of the enclosure
  
• Equipment requiring ventilation not compatible with enclosure installation
  
• Electrical components not approved by the manufacturer or electrician for enclosure mounting
  
• Improperly sealed wire penetrations
  
• Installations that do not meet local electrical code
  

Always confirm fit, wiring, clearances, heat exposure, and code requirements before installation.

Installation Notes

The SaunaLife SaunaGear 302 should be installed according to the enclosure instructions, sauna equipment manuals, and local electrical code.

General installation guidance:

• Confirm your electrical equipment fits inside the enclosure before ordering
  
• Have all electrical work completed by a licensed electrician
  
• Install on a flat, stable, approved mounting surface
  
• Maintain the gasket seal and close the hinged door after service access
  
• Use proper weather-rated fittings for all wire penetrations
  
• Avoid unnecessary drilling that could compromise the weatherproof rating
  
• Do not mount too close to the sauna heater or other high-heat areas
  
• Confirm equipment ventilation requirements before enclosing components
  
• Protect wiring and penetrations from water intrusion
  
• Follow all manufacturer manuals and local code requirements
  

The enclosure is designed to help protect compatible equipment, but correct installation is essential for proper protection.

SaunaGear 302 Waterproof Electrical Enclosure

One large IP67-rated waterproof sauna electrical enclosure.

Hinged Access Door

A hinged access door for service access.

Continuous Gasket Seal

A gasketed closure designed to help protect against dust and water intrusion when properly closed.

Stainless Steel Latches

Durable stainless steel latches for secure closure.

Internal Mounting Panel

Included mounting panel for compatible sauna electrical equipment.

Enclosure Mounting Feet

Mounting feet for secure installation to the sauna exterior or approved mounting surface.

Brand: SaunaLife

Product Name: SaunaGear 302 Waterproof Sauna Electrical Enclosure

Model: SAUNAGEAR 302

SKU: SAUNAGEAR302

Product Type: Waterproof Sauna Electrical Enclosure

Use: Outdoor sauna electrical equipment protection

Construction Material: UV-Stabilized Polycarbonate and Stainless Steel

Rating: IP67

Door: Hinged access door

Seal: Continuous gasket

Latches: Stainless steel

Exterior Width: 20.87" / 53 cm

Exterior Depth: 7.28" / 18.5 cm

Exterior Height: 29.18" / 74.1 cm

Included: Enclosure, internal mounting panel, enclosure mounting feet

Click Here for the SaunaLife Accessories Warranty

Free Shipping on Supplies & Accessories Over $150

The SaunaLife SaunaGear 302 Waterproof Sauna Electrical Enclosure qualifies for free shipping on supplies and accessories orders over $150.

When in stock, this item typically ships within 3–5 business days. If ordered with a sauna, heater, or larger freight item, accessories may ship separately.

For current stock availability, call or text 360-360-6968 or email info@nwimmersion.com before ordering. Once your order ships, tracking information will be provided by email.

SaunaLife Manufacturer Warranty

Click Here for the SaunaLife Accessories Warranty

The SaunaLife SaunaGear 302 is backed by SaunaLife’s applicable manufacturer warranty when installed and used according to official installation instructions.

Warranty coverage may vary by use environment, installation method, wiring penetrations, gasket integrity, maintenance, and code compliance. Improper installation, unauthorized modification, unsealed wire penetrations, damaged gasket, incorrect enclosure sizing, misuse, or failure to follow installation instructions may affect warranty eligibility.

As an Authorized SaunaLife Dealer, NW Immersion is here to help with product selection, electrical enclosure planning, installation guidance, troubleshooting, warranty guidance, and long-term sauna ownership support.